최신Microsoft Networking with Windows Server 2016 - 070-741무료샘플문제
문제1
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2.
Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2 You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
You add a computer to subnet1. The computer has an IP address of 10.10.0.129 Web1 receives a request from the new computer and sends a response.
What should you do?
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2.
Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2 You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
You add a computer to subnet1. The computer has an IP address of 10.10.0.129 Web1 receives a request from the new computer and sends a response.
What should you do?
정답: D
문제2
Your company has five departments, including a web research department.
You have a DHCP server named Server1 and two DNS servers named DNS1 and DNS2.
Server1 has an IPv4 scope named Scope1. All client computers are configured to use DNS1 for name resolution.
You need to ensure that users in the web research department use DNS2 for name resolution.
Your company has five departments, including a web research department.
You have a DHCP server named Server1 and two DNS servers named DNS1 and DNS2.
Server1 has an IPv4 scope named Scope1. All client computers are configured to use DNS1 for name resolution.
You need to ensure that users in the web research department use DNS2 for name resolution.
정답: F
문제3
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2.
Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2 You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
You need to identify which subnet mask you must use for subnet2. The solution must minimize the number of available IP addresses on Subnet2.
What subnet mask should you identify? To answer, select the appropriate options in the answer area.
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2.
Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2 You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
You need to identify which subnet mask you must use for subnet2. The solution must minimize the number of available IP addresses on Subnet2.
What subnet mask should you identify? To answer, select the appropriate options in the answer area.
정답:
문제4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it As a result, these questions will not appear In the review screen.
You are planning the deployment of DNS to a new network.
You have four internal DNS servers configured as shown in the following table.
The contos.com zone contains zone delegations for east.contoso.com. westcontoso.com, and south contoso.com All the DNS servers use root hints.
You need to ensure that all the DNS servers can resolve the names of all the internal namespaces and Internet hosts.
Solution: You configure Server2 and Server3 to forward DNS requests to 10.0.1.10.
Does this meet the goal?
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it As a result, these questions will not appear In the review screen.
You are planning the deployment of DNS to a new network.
You have four internal DNS servers configured as shown in the following table.
The contos.com zone contains zone delegations for east.contoso.com. westcontoso.com, and south contoso.com All the DNS servers use root hints.
You need to ensure that all the DNS servers can resolve the names of all the internal namespaces and Internet hosts.
Solution: You configure Server2 and Server3 to forward DNS requests to 10.0.1.10.
Does this meet the goal?
정답: B
문제5
You have an Active Directory domain named Contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2016.
You install the Remote Access server role on Server1. You install the Network Policy and Access Services server role on Server2.
You need to configure Server1 to use Server2 as a RADIUS server.
What should you do?
You have an Active Directory domain named Contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2016.
You install the Remote Access server role on Server1. You install the Network Policy and Access Services server role on Server2.
You need to configure Server1 to use Server2 as a RADIUS server.
What should you do?
정답: A
설명: (KoreaDumps 회원만 볼 수 있음)
문제6
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit below.
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You need to enable the Guest Service integration service for VM1.
Does this meet the goal?
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit below.
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You need to enable the Guest Service integration service for VM1.
Does this meet the goal?
정답: A
문제7
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
Your network contains Windows and non-Windows devices.
You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
You need to prevent a client computer that uses the same name as an existing registration from updating the registration.
What should you do?
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
Your network contains Windows and non-Windows devices.
You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
You need to prevent a client computer that uses the same name as an existing registration from updating the registration.
What should you do?
정답: C
설명: (KoreaDumps 회원만 볼 수 있음)
문제8
You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.
You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.
What should you do?
You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3.
You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.
What should you do?
정답: A
문제9
You have a remote access server named Server1 that runs Windows Server 2016. Server1 has DirectAccess enabled.
A firewall connects Server1 to the Internet.
You need to configure the firewall to ensure that DirectAccess clients can connect to Server1 by using Teredo, 6to4, and IP-HTTPS.
Which inbound port should be open on the firewall for each transition technology?
To answer, drag the appropriate ports and protocols to the correct transition technologies. Each port and protocol may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
You have a remote access server named Server1 that runs Windows Server 2016. Server1 has DirectAccess enabled.
A firewall connects Server1 to the Internet.
You need to configure the firewall to ensure that DirectAccess clients can connect to Server1 by using Teredo, 6to4, and IP-HTTPS.
Which inbound port should be open on the firewall for each transition technology?
To answer, drag the appropriate ports and protocols to the correct transition technologies. Each port and protocol may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
정답:
문제10
You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.
You need to ensure that the traffic is distributed evenly among the virtual machines that host App1.
What should you include in the environment?
You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.
You need to ensure that the traffic is distributed evenly among the virtual machines that host App1.
What should you include in the environment?
정답: A
설명: (KoreaDumps 회원만 볼 수 있음)
문제11
You are configuring the network for a small branch office. Currently, the branch office does not connect directly to the Internet.
In the branch office, you deploy a new server named Server1 that has a server Core installation of Windows Server 2016. Server1 has two network adapters configured as shown in the following table.
You plan to use Server1 to provide Internet connectivity for the branch office.
Routing and Remote Access (RRAS) in installed and configured for VPN remote access on Server1.
You need to configure RRAS on Server1 to provide network address translation (NAT).
Which command or cmdlet should you use first?
You are configuring the network for a small branch office. Currently, the branch office does not connect directly to the Internet.
In the branch office, you deploy a new server named Server1 that has a server Core installation of Windows Server 2016. Server1 has two network adapters configured as shown in the following table.
You plan to use Server1 to provide Internet connectivity for the branch office.
Routing and Remote Access (RRAS) in installed and configured for VPN remote access on Server1.
You need to configure RRAS on Server1 to provide network address translation (NAT).
Which command or cmdlet should you use first?
정답: C
문제12
You have multiple servers that run Windows Server 2016.
You need to install the DNS Server server role on one of the servers.
What should you run?
You have multiple servers that run Windows Server 2016.
You need to install the DNS Server server role on one of the servers.
What should you run?
정답: D
문제13
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages all of the DHCP servers on your network.
You are troubleshooting an issue for a client that fails to receive an IP address from DHCP.
You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
Solution: From Task Scheduler, you run the Microsoft\Windows\IPAM\Audit task.
Does this meet the goal?
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages all of the DHCP servers on your network.
You are troubleshooting an issue for a client that fails to receive an IP address from DHCP.
You need to ensure that from IPAM1, you can view all of the event data for the DHCP leases from the last 24 hours.
Solution: From Task Scheduler, you run the Microsoft\Windows\IPAM\Audit task.
Does this meet the goal?
정답: A
문제14
You have a remote access server named Server1 that runs Windows Server 2016. Server1 has DirectAccess enabled.
You have a proxy server named Server2. All computers on the internet connect to the Internet by using the proxy.
On Server1, you run the command Set-DAClient -ForceTunnel Enabled.
You need to ensure that when a Direct Access client connects to the network, the client accesses all the Internet resources through the proxy.
What should you run on Server1?
You have a remote access server named Server1 that runs Windows Server 2016. Server1 has DirectAccess enabled.
You have a proxy server named Server2. All computers on the internet connect to the Internet by using the proxy.
On Server1, you run the command Set-DAClient -ForceTunnel Enabled.
You need to ensure that when a Direct Access client connects to the network, the client accesses all the Internet resources through the proxy.
What should you run on Server1?
정답: C
설명: (KoreaDumps 회원만 볼 수 있음)