최신3COM 3M0-200 - 3M0-200무료샘플문제

A. T1/E1 Digital Line port

B. Analog FXS port

C. RJ-11 PFT port

D. USB port

E. 10/100 Mbps Ethernet port

F. Analog FXO port

A. With a single NBX system at HQ, users can call to/from a remote office across the data network WAN link using Layer 3 IP communications

B. With a single NBX system at HQ and pcXset on the remote office PC, the remote user can call to/from HQ via any WAN link using TCP/IP Layer 4 communications

C. With an NBX Telephony system and NBX ConneXtions Gateways at each location, users can call to/from the sites via a WAN link that supports IP protocol, for example., VPN, T1, E1, Frame and Relay

D. With an NBX Network Call Processor (NCP) and NBX ConneXtions Gateways at each site, users can call to/from the sites via a Virtual Tie Line (VTL)

E. With an NBX Network Call Processor (NCP) at each location, users can call to/from the sites via a Virtual Tie Line (VTL) using IP On-the-Fly or a Standard IP license

A. In a Circular Hunt group, the extension next in line to receive a call becomes first in line to receive a new call

B. Any number of users and hunt groups can be created on the SuperStack 3 NBX Telephony system

C. A hunt group is a collection of telephones that ring in a pre-determined order until the call is answered

D. After four rings, a call is automatically sent to the next member in the group

E. In a Linear Hunt group, the first member listed will always receive the call unless their line is busy and then the call is forwarded to the next member in the group

F. Up to 99 Hunt Groups can be assigned on an NBX 100 Communications System

G. A call will ring on the first open line in the Hunt Group. If the call is not answered it is forwarded to voice mail or the Auto Attendant

A. Select Dial Plan / Hunt Groups and choose the desired Hunt Group and click Modify

B. Select User Configuration / Hunt Groups and choose the desired Hunt Group and click Modify

C. Select Dial Plan / Table and choose the desired Hunt Group and click Modify

D. Select Operations/ Hunt Groups and choose the desired Hunt Group and click Modify

A. Network switches must support IEEE 802.1p

B. Requires NBX 3XXX model phones

C. NBX phone must be attached to the network through a PC that supports VLAN tagging

D. VLAN tagging must be turned on

E. SuperStack 3 NBX Network Telephony System and the NBX 100 Communication System do not support packet prioritization