최신Nokia Quality of Service - 4A0-107무료샘플문제

A. Defining the slope of the TCP slow-start mechanism for self generated traffic.

B. Defining the slope of the scheduling rate per forwarding class when using HQoS.

C. Defining the high and low slope values when deploying buffer admission control for TCP traffic in the shared buffer pool.

D. Defining the high and low slope values when deploying buffer admission control for UDP traffic in the committed buffer pool.

E. Defining the high and low slope values when deploying buffer admission control for TCP traffic in the committed buffer pool.

A. FC H1, high

B. FCH1, low

C. FCAF, high

D. FCAF, low

A. TRUE

B. FALSE

A. IP DF bit

B. DSCP value

C. HTML version number

D. 802.1p value

E. TCP/UDP port numbers

A. DSCP bits can be set per application, per routing instance.

B. The internal forwarding class for self-generated traffic is set once and applied to the base router and all VPRN instances.

C. In order to mark Layer 2 self-generated traffic, network interfaces must be set to dot1Q.

D. The DSCP marking stays nc1 for all applications. Only the internal FC is manipulated across different applications.

E. In order to mark Layer 2 traffic, sgt-qos will set various ToS bits.

A. NC, high

B. BE, low

C. BE, high

D. NC, low

A. To force the TCP algorithm to increase its transmission window upon detecting a congestion.

B. To limit the number of the TCP sessions that go into slow start during congestion.

C. To control any traffic flowing through the shared buffer space of the queue.

D. To have control over the amount of the low priority packets that enter the queue.

A. High Priority

B. Gold

C. Assured

D. Best Effort

A. Set the queue's MBS to 0

B. Set the queue's high-priority-only equal to the MBS

C. Set the queue's CBS to 0

D. Set the queue's MBS equal to the CBS

E. Set the queue's high-priority-only to 0

A. AF traffic is dropped.

B. Policer 1 on the queue-group Q-Group1 instance 1.

C. The default policer 1.

D. Policer 2 on the queue-group Q-Group1 instance 1.

A. Priority is used when a packet enters a SAP-ingress queue.

B. Both high priority-only buffer space and WRED can be used in a queue.

C. Buffer admission control limits the number of out-of-profile packets that enter the queue.

D. A packet is accepted into a queue based on its priority and forwarding class.