최신Nokia Segment Routing - 4A0-116무료샘플문제

A. It selects a remote router, reachable through a tunnel defined by a Node-SID and one or two Adjacency-SIDs.

B. It selects an immediate neighbor.

C. It can select an immediate neighbor or a remote router, as long as the backup path coincides with the path that will become active after IGP reconvergence.

D. It selects a remote router, reachable through a tunnel defined by a single Node-SID.

A. The Node-SID assigned to this router is the second label in the defined range.

B. Adjacency-SID labels will not be advertised as they have not been defined under the physical interfaces.

C. Traffic engineering information will only be advertised for the interfaces that have both MPLS and RSVP enabled.

D. Traffic engineering has been enabled on this router.

A. Intermediate routers do not maintain any tunnel informal

B. No path signaling is required to establish an SR tunnel.

C. For TE-constrained tunnels, each data packet typically carries a single MPLS label to specify the tunnel path.

D. A link-state IGP is required to distribute SID information.

A. Specifying whether the LSP paths will be computed locally or by an external path computation element (PCE).

B. Configuring at least one router in the network to create and advertise the flex-algo definition.

C. Configuring LSPs between every pair of PE routers.

D. Configuring the proper values for the shared-risk link groups (SRLGs) that will define the flex-algo topology.

A. Establishing IGP adjacencies with routers R1 and R2

B. Establishing BGP sessions using the BGP-LS address family with routers R3 and R4

C. Establishing a BGP session using the BGP-LS address family with router R3

D. Establishing an IGP adjacency with router R2