최신Microsoft Configuring Advanced Windows Server 2012 Services - 70-412무료샘플문제
문제1
You configure the nodes to use the port rule shown in the exhibit. (Click the Exhibit button.)
You need to configure the NLB cluster to meet the following requirements:
* HTTPS connections must be directed to Server1 if Serverl is available.
* HTTP connections must be load balanced between the two nodes.
Which three actions should you perform? {Each correct answer presents part of the solution. Choose three.
You configure the nodes to use the port rule shown in the exhibit. (Click the Exhibit button.)
You need to configure the NLB cluster to meet the following requirements:
* HTTPS connections must be directed to Server1 if Serverl is available.
* HTTP connections must be load balanced between the two nodes.
Which three actions should you perform? {Each correct answer presents part of the solution. Choose three.
정답: B,E,F
설명: (KoreaDumps 회원만 볼 수 있음)
문제2
You have a server named Server1 that runs Windows Server 2012 R2.
Windows Server 2012 R2 is installed on volume C.
You need to ensure that Safe Mode with Networking loads the next time Server1 restarts.
Which tool should you use?
You have a server named Server1 that runs Windows Server 2012 R2.
Windows Server 2012 R2 is installed on volume C.
You need to ensure that Safe Mode with Networking loads the next time Server1 restarts.
Which tool should you use?
정답: A
설명: (KoreaDumps 회원만 볼 수 있음)
문제3
You are about to promote a server running the Windows Server 2012 R2 operating system to domain controller.
The domain is currently running at the Windows Server 2008 domain functional level.
Your account is a member of the Domain Admins group.
Which additional groups should your account be a member of to ensure that the environment is appropriately configured for this domain controller running Windows Server 2012 R2? (Choose two. Each answer forms part of a complete solution.)
You are about to promote a server running the Windows Server 2012 R2 operating system to domain controller.
The domain is currently running at the Windows Server 2008 domain functional level.
Your account is a member of the Domain Admins group.
Which additional groups should your account be a member of to ensure that the environment is appropriately configured for this domain controller running Windows Server 2012 R2? (Choose two. Each answer forms part of a complete solution.)
정답: B,D
문제4
Your network uses the 192.168.2.0/23 address space.
You are configuring video conferencing infrastructure.
You need to configure the dhcp server to lease ip address for multicast address for video conferencing.
What command should you run on the dhcp server? To answer,select the apprperiate options in the answer area add-dhcpserverv4multicastscope -name "vc scope" -startscope [Start Range] [End Range]
192.168.2.10 192.168.2.255
225.0.0.10 225.0.0.250
239.0.0.1 240.0.0.0
fd80:: fe80:
ff00:: ff02:
Your network uses the 192.168.2.0/23 address space.
You are configuring video conferencing infrastructure.
You need to configure the dhcp server to lease ip address for multicast address for video conferencing.
What command should you run on the dhcp server? To answer,select the apprperiate options in the answer area add-dhcpserverv4multicastscope -name "vc scope" -startscope [Start Range] [End Range]
192.168.2.10 192.168.2.255
225.0.0.10 225.0.0.250
239.0.0.1 240.0.0.0
fd80:: fe80:
ff00:: ff02:
정답: B
설명: (KoreaDumps 회원만 볼 수 있음)
문제5
Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1. Server1 is a BranchCache hosted cache server that is located in a branch office.
The network contains client computers that run either Windows 7 or Windows 8.
For the branch office, all of the user accounts and the client computer accounts are located in an organizational unit (OU) named Branch1. A Group Policy object (GPO) named GPO1 is linked to Branch 1. GPO1 contains the BranchCache settings.
You discover that users in the branch office who have client computers that run Windows 7 do not access cached content from Server1. Users in the branch office who have Windows 8 computers access cached content from Server1.
You need to configure the Windows 7 computers to use BranchCache on Server1. Which setting should you configure in GPO1?
To answer, select the appropriate setting in the answer area.
Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1. Server1 is a BranchCache hosted cache server that is located in a branch office.
The network contains client computers that run either Windows 7 or Windows 8.
For the branch office, all of the user accounts and the client computer accounts are located in an organizational unit (OU) named Branch1. A Group Policy object (GPO) named GPO1 is linked to Branch 1. GPO1 contains the BranchCache settings.
You discover that users in the branch office who have client computers that run Windows 7 do not access cached content from Server1. Users in the branch office who have Windows 8 computers access cached content from Server1.
You need to configure the Windows 7 computers to use BranchCache on Server1. Which setting should you configure in GPO1?
To answer, select the appropriate setting in the answer area.
정답:
Explanation
Hosted Cache mode
In hosted cache mode, cached content is maintained on a computer running Windows Server 2008 R2 on the branch office network.
Reference: BranchCache Early Adopter's Guide, Client Configuration
http://technet.microsoft.com/en-us/library/dd637820(v=ws.10).aspx
문제6
Which of the following must you back up or have a copy of to be able to ensure that you can restore an AD RMS cluster in the event that a single server hosting all AD RMS components suffers complete data loss?
(Choose three answers.)
Which of the following must you back up or have a copy of to be able to ensure that you can restore an AD RMS cluster in the event that a single server hosting all AD RMS components suffers complete data loss?
(Choose three answers.)
정답: A,C,D
문제7
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You need to create an IPv6 scope on Server1. The scope must use an address space that is reserved for private networks. The addresses must be routable.
Which IPV6 scope prefix should you use?
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You need to create an IPv6 scope on Server1. The scope must use an address space that is reserved for private networks. The addresses must be routable.
Which IPV6 scope prefix should you use?
정답: B
설명: (KoreaDumps 회원만 볼 수 있음)
문제8
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are configured as shown in the following table.
You need to ensure that when new targets are added to Server1, the targets are registered on Server2 automatically.
What should you do on Server1?
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are configured as shown in the following table.
You need to ensure that when new targets are added to Server1, the targets are registered on Server2 automatically.
What should you do on Server1?
정답: A
설명: (KoreaDumps 회원만 볼 수 있음)
문제9
Your company recently deployed a new Active Directory forest named contoso.com. The forest contains two Active Directory sites named Site1 and Site2. The first domain controller in the forest runs Windows Server
2012 R2.
You need to force the replication of the SYSVOL folder from Site1 to Site2.
Which tool should you use?
Your company recently deployed a new Active Directory forest named contoso.com. The forest contains two Active Directory sites named Site1 and Site2. The first domain controller in the forest runs Windows Server
2012 R2.
You need to force the replication of the SYSVOL folder from Site1 to Site2.
Which tool should you use?
정답: C
설명: (KoreaDumps 회원만 볼 수 있음)
문제10
You have a server named Server1 that runs Windows Server 2012 R2.
You are configuring a storage space on Server1.
You need to ensure that the storage space supports tiered storage.
Which settings should you configure?
To answer, select the appropriate options in the answer area.
You have a server named Server1 that runs Windows Server 2012 R2.
You are configuring a storage space on Server1.
You need to ensure that the storage space supports tiered storage.
Which settings should you configure?
To answer, select the appropriate options in the answer area.
정답:
Explanation
Disk Allocation: Automatic
* When using tiers, you must fixed provisioning.
http://blogs.technet.com/resized-image.ashx/__size/550x0/__key/communityserver-blogs-components-weblogfil
Reference: Storage Spaces: How to configure Storage Tiers with Windows Server 2012 R2
문제11
You run Get-FSRMClassificationule and you receive the following output
You have a file named file1 that is stored on drive D and has the following content "111000000000111111" You run the classification with all of the rules.
Use the drop-down menus to select the answer choice that completes each statement.
You run Get-FSRMClassificationule and you receive the following output
You have a file named file1 that is stored on drive D and has the following content "111000000000111111" You run the classification with all of the rules.
Use the drop-down menus to select the answer choice that completes each statement.
정답:
Explanation
(https://technet.microsoft.com/en-us/library/jj900627%28v=wps.630%29.aspx)
문제12
Your network contains one Active Directory forest named adatum.com.
The forest contains a single domain.
The site topology for the forest is shown in the exhibit.
Each site contain s one domain controller.
You need to ensure that replication between site2 and site4 occurs in 15 minutes or less.
What command should you run? To answer select the appropriate options in the answer area.
Answer Area
Your network contains one Active Directory forest named adatum.com.
The forest contains a single domain.
The site topology for the forest is shown in the exhibit.
Each site contain s one domain controller.
You need to ensure that replication between site2 and site4 occurs in 15 minutes or less.
What command should you run? To answer select the appropriate options in the answer area.
Answer Area
정답:
Explanation
(Specifically look up - ReplicationFrequencyinMinutes)
https://technet.microsoft.com/en-us/%5Clibrary/Hh852257(v=WPS.630).aspx
문제13
You have a server named LON-DC1 that runs Windows Server 2012 R2. An iSCSI virtual disk named VirtualiSCSI1.vhd exists on LON-DC1 as shown in the exhibit. (Click the Exhibit button.)
You create a new iSCSI virtual disk named VirtualiSCSI2.vhd by using the existing itgt iSCSI target.
VirtualiSCSIl.vhd is removed from LON-DC1.
You need to assign VirtualiSCSI2.vhd a logical unit value of 0.
What should you do?
You have a server named LON-DC1 that runs Windows Server 2012 R2. An iSCSI virtual disk named VirtualiSCSI1.vhd exists on LON-DC1 as shown in the exhibit. (Click the Exhibit button.)
You create a new iSCSI virtual disk named VirtualiSCSI2.vhd by using the existing itgt iSCSI target.
VirtualiSCSIl.vhd is removed from LON-DC1.
You need to assign VirtualiSCSI2.vhd a logical unit value of 0.
What should you do?
정답: C
설명: (KoreaDumps 회원만 볼 수 있음)
문제14
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 has the IP Address Management (IPAM) Server feature installed.
A technician performs maintenance on Server1.
After the maintenance is complete, you discover that you cannot connect to the IPAM server on Server1.
You open the Services console as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can connect to the IPAM server.
Which service should you start?
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 has the IP Address Management (IPAM) Server feature installed.
A technician performs maintenance on Server1.
After the maintenance is complete, you discover that you cannot connect to the IPAM server on Server1.
You open the Services console as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can connect to the IPAM server.
Which service should you start?
정답: A
설명: (KoreaDumps 회원만 볼 수 있음)