최신F5 BIG-IP v10.x LTM Essentials V10.x - F50-531무료샘플문제

A. It is an optional feature of each virtual server.

B. It is not configured; it is default behavior.

C. It is an optional feature of each pool.

D. It an option within a TCP profile.

A. Some of the changes to TEST1 may propagate to TEST2.

B. All changes to TEST1 are propagated to TEST2.

C. Changes to TEST1 cannot affect TEST2 once TEST2 is saved.

D. When TEST1 is changed, the administrator is prompted and can choose whether to propagate changes to TEST2.

A. This is not possible since both systems are updated simultaneously.

B. The older system will issue SNMP traps indicating a communication error with the partner.

C. The first system to be updated will assume the Active role.

D. Synching should not be performed.

A. Provisioning allows the administrator to activate modules in non-standard combinations.

B. Provisioning allows modules that are not licensed to be fully tested.

C. Provisioning allows modules that are licensed be granted appropriate resource levels.

D. Provisioning allows the administrator to see what modules are licensed, but no user action is ever required.

A. Regardless of the configuration, some data is communicated between the systems at regular intervals.

B. Data for both connection and persistence mirroring are shared through the same TCP connection.

C. Communication between the systems cannot be effected by port lockdown settings.

D. Connection mirroring data is shared through the serial fail-over cable unless network fail-over is enabled.

A. 10.10.20.4:80

B. 10.10.20.1:80

C. 10.10.20.3:80

D. 10.10.20.5:80

E. 10.10.20.2:80

A. A SNAT using automap will preferentially use a floating self-IP over a non-floating self-IP.

B. A SNAT using automap can be used to translate the source address of all outgoing traffic to the same address regardless of which VLAN the traffic is sent through.

C. Only specified self-IP addresses are used as automap addresses.

D. SNATs using automap will translate all client addresses to an automap address.

A. The connection request is sent to an topology server.

B. The connection request is not processed.

C. The connection request is load-balanced to an available pool member.

D. The connection request is refused and the client is sent a "server not available" message.

A. When the load-balancing choice references "node", the addresses' parameters are used to make the load-balancing choice rather than the member's parameters.

B. Load-balancing options referencing "nodes" are available only when the pool members are defined for the "any" port.

C. There is no difference; the two terms are referenced for backward compatibility purposes.

D. When the load-balancing choice references "node", priority group activation is unavailable.

A. Floating self-IP addresses are hosted only by the active system.

B. Monitors are performed only by the active system.

C. Fail-over triggers only cause changes on the active system.

D. Virtual server addresses are hosted only by the active system.

E. Configuration changes can only be made on the active system.