최신Fortinet FCP - Secure Wireless LAN 7.4 Administrator - FCP_FWF_AD-7.4무료샘플문제

A. Security channels

B. Control channels

C. Data channels

D. FortLink channels

A. On the FortiGate CL! using the diagnose wireless-controller wlac -d sta command

B. On the FortiAP CLI using the cw_diag ksta command

C. On the FortiGate GUI using the WiFi Client monitor

D. On the FortiAP CLI using the cw_diag -d sea command

A. The wireless client has been transmitting traffic with all performance metrics within the normal levels

B. The wireless client has been experiencing high background noise within the last 5 minutes

C. The wireless client has been switching between available wireless bands within the last 5 minutes

D. The wireless client has been dropping half of the packets transmitted within the last 5 minutes.

A. Radio 3 is the configured dedicated monitoring radio for this FortiAP model.

B. The 5 GHz frequency band is available only on Radio 3.

C. Only Radio 3 is compatible with the selected band.

D. Radio 1 and Radio 2 are unavailable to run the spectrum analysis.

A. Wi-Fi signal boosters.

B. WIDS profiles.

C. DHCP options.

D. Bandwidth management profiles.

A. Enables the AP to detect rogue APs.

B. Makes the network invisible to casual scanning by devices.

C. Allows APs to automatically detect and connect to each other.

D. Helps in boosting Wi-Fi signal strength.

A. Check the SSID broadcast settings

B. Review the client's signal strength

C. Analyze packet captures

D. Verify VLAN configurations

A. Check the power feed to the FortiAP device and PoE status if powered by a switch.

B. Access FortiAP management using HTTPs.

C. Verify that communication between FortiAP and the wireless controller is not blocked.

D. Restart the wireless controller if it is unresponsive for the newly added FortiAP device.

A. Checking the uplink speed of all devices.

B. Monitoring wireless channels and spectrum.

C. Analyzing Ethernet traffic for suspicious patterns.

D. Evaluating the DHCP server logs.

A. WPA2 authentication vulnerabilities

B. Rogue access points

C. Unauthorized wireless connection

D. Brute-force dictionary attacks

A. On the FortiGate CLI, using the diag wireless-controller wlac -d Sta command

B. On the FortiAP CLI, using the cw_diag -d sta command

C. On the FortiGate GUI, using the WiFi Client monitor

D. On the FortiAP CLI, using the cw_diag ksta command

A. Assign a VLAN to each SSID

B. Configure a tunnel mode for all wireless networks

C. Create and apply a FortiAP profile

D. Preauthorize APs on the FortiGate

A. config wifi wids

B. config wlan wids-profile

C. config firewall wids

D. config wireless-controller wids