최신Network Appliance NetApp Certified Support Engineer - NS0-194무료샘플문제
문제1
Your customer cannot access a directory using NFSv3. When the customer uses the is ls -l command for this directory, it reports UNIX permissions of 777. In this scenario, what is happening?
Your customer cannot access a directory using NFSv3. When the customer uses the is ls -l command for this directory, it reports UNIX permissions of 777. In this scenario, what is happening?
정답: D
설명: (KoreaDumps 회원만 볼 수 있음)
문제2
You want to update your storage system and are concerned about the compatibility of the SAN components and the host environment. In this scenario, which two actions should you take to verify compatibility? (Choose two.)
You want to update your storage system and are concerned about the compatibility of the SAN components and the host environment. In this scenario, which two actions should you take to verify compatibility? (Choose two.)
정답: A,C
문제3
A customer has a FAS2750 switched configuration using Cisco 3132Q-V 40GbE switches. The customer wants to add a pair of AFF A800 nodes into the cluster. Where does a customer verify this configuration before joining the cluster? (Choose two.)
A customer has a FAS2750 switched configuration using Cisco 3132Q-V 40GbE switches. The customer wants to add a pair of AFF A800 nodes into the cluster. Where does a customer verify this configuration before joining the cluster? (Choose two.)
정답: C,D
설명: (KoreaDumps 회원만 볼 수 있음)
문제4
Your customer's MetroCluster has generated a "DISK REDUNDANCY FAILED" message.
Netapp-EmA:
Tue Jan 14 04:12:12 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv' failed.
Tue Jan 14 04:12:13 CET [netapp-EmA:rv.connection.torndown:info]: HA interconnect: cfo_rv1 is torn down on NIC 1.
Tue Jan 14 04:12:13 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv'1 failed.
Tue Jan 14 04:12:15 CET [netapp-EmA:rv.connection.torndown:info]: HA interconnect: cfo_rv2 is torn down on NIC 1.
Tue Jan 14 04:12:18 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv'2 failed.
Tue Jan 14 04:12:19 CET [netapp-EmA:bridge.removed:info]: FC-to_SAS bridge siteB_2:13.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111161] was removed Tue Jan
14 04:12:19 CET [netapp-EmA:bridge.removed:info]: FC-to_SAS bridge siteB_2:5.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111160] was removed Netapp-EmB:
Tue Jan 14 04:12:12 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv' failed.
Tue Jan 14 04:12:12 CET [netapp-EmB:rv.connection.torndown:info]: HA interconnect: cfo_rv2 is torn down on NIC 1.
Tue Jan 14 04:12:13 CET [netapp-EmB:rv.connection.torndown:info]: HA interconnect: cfo_rv1 is torn down on NIC 1.
Tue Jan 14 04:12:13 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv'1 failed.
Tue Jan 14 04:12:18 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv'2 failed.
Tue Jan 14 04:12:19 CET [netapp-EmB:bridge.removed:info]: FC-to_SAS bridge siteA_2:13.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111167] was removed Tue Jan
14 04:12:19 CET [netapp-EmB:bridge.removed:info]: FC-to_SAS bridge siteA_2:5.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111164] was removed Referring to the messages shown in the exhibit for each node, which component is causing the problem?
Your customer's MetroCluster has generated a "DISK REDUNDANCY FAILED" message.
Netapp-EmA:
Tue Jan 14 04:12:12 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv' failed.
Tue Jan 14 04:12:13 CET [netapp-EmA:rv.connection.torndown:info]: HA interconnect: cfo_rv1 is torn down on NIC 1.
Tue Jan 14 04:12:13 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv'1 failed.
Tue Jan 14 04:12:15 CET [netapp-EmA:rv.connection.torndown:info]: HA interconnect: cfo_rv2 is torn down on NIC 1.
Tue Jan 14 04:12:18 CET [netapp-EmA:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv'2 failed.
Tue Jan 14 04:12:19 CET [netapp-EmA:bridge.removed:info]: FC-to_SAS bridge siteB_2:13.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111161] was removed Tue Jan
14 04:12:19 CET [netapp-EmA:bridge.removed:info]: FC-to_SAS bridge siteB_2:5.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111160] was removed Netapp-EmB:
Tue Jan 14 04:12:12 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv' failed.
Tue Jan 14 04:12:12 CET [netapp-EmB:rv.connection.torndown:info]: HA interconnect: cfo_rv2 is torn down on NIC 1.
Tue Jan 14 04:12:13 CET [netapp-EmB:rv.connection.torndown:info]: HA interconnect: cfo_rv1 is torn down on NIC 1.
Tue Jan 14 04:12:13 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv'1 failed.
Tue Jan 14 04:12:18 CET [netapp-EmB:cf.rv.notConnected:error]: HA interconnect: Connection for 'cfo_rv'2 failed.
Tue Jan 14 04:12:19 CET [netapp-EmB:bridge.removed:info]: FC-to_SAS bridge siteA_2:13.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111167] was removed Tue Jan
14 04:12:19 CET [netapp-EmB:bridge.removed:info]: FC-to_SAS bridge siteA_2:5.126L0 [ATTO FibreBridge6500N 1.61] S/N [FB7500N111164] was removed Referring to the messages shown in the exhibit for each node, which component is causing the problem?
정답: C
문제5
Click the Exhibit button.
You have configured CIFS auditing. After a week, all users are complaining that they cannot access the CIFS shares anymore.
Referring to the exhibit, what is the reason for this problem?
Click the Exhibit button.
You have configured CIFS auditing. After a week, all users are complaining that they cannot access the CIFS shares anymore.
Referring to the exhibit, what is the reason for this problem?
정답: C
설명: (KoreaDumps 회원만 볼 수 있음)
문제6
The details from within Active IQ Cluster Viewer are downloadable in which three file formats?
(Choose three.)
The details from within Active IQ Cluster Viewer are downloadable in which three file formats?
(Choose three.)
정답: A,B,D
문제7
Referring to the exhibit, which two components should be examined? (Choose two.)
Referring to the exhibit, which two components should be examined? (Choose two.)
정답: B,D
문제8
When troubleshooting an I/O module (IOM), whichaction should you perform before replacing it?
When troubleshooting an I/O module (IOM), whichaction should you perform before replacing it?
정답: A
설명: (KoreaDumps 회원만 볼 수 있음)
문제9
What are two reasons to use HTTPS as the transport method for AutoSupport delivery for Active IQ? (Choose two.)
What are two reasons to use HTTPS as the transport method for AutoSupport delivery for Active IQ? (Choose two.)
정답: B,D
설명: (KoreaDumps 회원만 볼 수 있음)